features . volt level output . on-chip amplification and temperature compensations . pre-calibration of offset voltage and span . surface mount package (xfgn) applications . non-invasive blood pressure(nibp)monitor for home health care . vacuum cleaner . washing machine part number for ordering xfgn - 6 025kp g s r pressure type gauge pressure model xfpn xfgn-6 package configuration dual-in-line-package (dip) surface mount package,6mm pressure port measurable pressure range (kpa) part number for ordering 0 24.5 xfpn-03pgv xfpn-03pgvr xfgn-603pgvsr 0 100 xfpn-100kpgv xfpn-100kpgvr xfgn-6100kpgvsr 0 25 xfpn-025kpg xfpn-025kpgr xfgn-6025kpgsr 0 50 xfpn-050kpg xfpn-050kpgr XFGN-6050KPGSR 0 100 xfpn-100kpg xfpn-100kpgr xfgn-6100kpgsr 0 200 xfpn-200kpg xfpn-200kpgr xfgn-6200kpgsr model/rated pressure 03pgv 100kpgv 025kpg 050kpg 100kpg 200kpg unit recommended operating conditions pressure type gauge pressure rated pressure 24.5 100 25 50 100 200 kpa 0.250 1.020 0.255 1.020 1.020 2.040 kg/cm 2 pressure media non-corrosive gas excitation voltage 50.25 vdc absolute maximum rating maximum load pressure twice of rated pressure maximum excitation voltage 8vdc operating temperature 10 80 storage temperature 20 100 operating humidity 30 80 (no dew condensation) rh electric performances/characteristics (excitation voltage vcc=5.0v constant, ambient temperature ta=25 ) current consumption less than 10 ma output impedance less than 10 source current less than 0.2 ma sink current less than 2 ma mechanical response time 2 (for the reference) msec full scale span voltage 4.0 v offset voltage 0.5 0.1 v full scale span voltage 4.5 0.1 v accuracy 5.0 fs/0 50 note ; excluding input voltage error. pre-amplified/5v excitation/gauge xfpn,xfgn-6 data sheet terminal leads direction (see outline diagram) no mark : r: rated pressure (pa) model xfpn xfgn length of the pressure port (xfgn only) 6:6mm terminal leads configuration no mark : dip (xfpn) s : surface mount package (xfgn) pressure type g : gauge (positive pressure) gv : gauge (negative pressure) specifications 1
0.5 12 14 15.24(600mil) max 15 2.54 2.54 2.8 6.8 60 1.2 0.5 6 5 4 1 2 3 6 5 4 1 2 3 0.8 4.5 0.6 48 2.2 r1.5 0.25 3 c0.5 labelled faceplate terminal leads pressure port vent hole 15.2 2.54 2.54 6- 0.9(diameter of through holes) 6- 1.8(diameter of lands) 0.5 12 6 5 4 14 48 2.2 r1.5 c0.5 15.24(600mil) max 15 0.25 3 1 2 3 4.5 2.54 2.54 2.8 6.8 1.2 0.5 6 5 4 1 2 3 60 0.8 0.6 labelled faceplate terminal leads pressure port vent hole 15.2 2.54 2.54 6- 0.9(diameter of through holes) 6- 1.8(diameter of lands) xfpn unit:mm recommended footprint for pcb (unit : mm) xfpn-r unit:mm recommended footprint for pcb (unit : mm) pre-amplified/5v excitation/gauge xfpn,xfgn-6 data sheet outline dimensions 2
2.54 2.54 0.8 7 7 0.8 10.3 m ax. 15 1 3 0.25 3.5 0.5 6 9.5 2-r0.5 123 123 654 654 projections projections vent hole pressure port labelled faceplate index 2.54 2.54 6.0 1.4 2- 1(holes for projections) 6.0 9.4 1.7 land-pads vout c1 c2 gnd vout gnd vcc vcc(dc5v) - 10 0 10 0 1 2 3 4 5 6 20 30 40 50 60 70 80 temperature temperature error multiplier vout=vs (p + ) (pressure error temperature error multiplier vs) vs=5.0volts notes ; the output voltage (vout) is no perfect ratiometric with the power supply voltage. p=input pressure(kpa) temperature error multiplier note ; please read instruction ?notes? before using the sensor. fujikura reserves the right to change specifications without notice. if you have any questions regarding technical issues or specifications, please contact us. sensor engineering department 5-1 kiba 1-chome, koto-ku, tokyo 135-8512, japan phone +81-(0)3-5606-1072 fax. +81-(0)3-5606-1538 e-mail : sensor@fujikura.co.jp xfpn-6 unit:mm recommended footprint for pcb (unit : mm) xfpn, xfgn-6 pre-amplified/5v excitation/gauge xfpn,xfgn-6 data sheet model pressure range pressure error(kpa) 03pgv 0 24.5kpa 0.03266 0.1 0.612 025kpg 0 25kpa 0.032 0.1 0.625 050kpg 0 50kpa 0.016 0.1 1.25 100kpg 0 100kpa 0.008 0.1 2.5 100kpgv 0 100kpa 0.008 0.1 2.5 200kpg 0 200kpa 0.004 0.1 5.0 outline dimensions connection diagram remarks : 1) c1 : connect 680pf capacitor within 2cm distance from leads. 2) c2 : connect 0.01 f or more capacitor within 2cm dis- tance from leads. 3) 4 and 5 pins must be no connection. open them as float- ing ones completely, and do not connect to other line or each other. transfer function 3
|
